Shiraz Mujahid

Journal Papers

• Mujahid, S., Boostani, A.F., Paudel, Y., Oppedal, A., Paliwal, B., Rhee, H., El Kadiri, H., 2024. Examination of Novel Titanium-639 Alloy as a Means of Balancing Strength and Ductility through Molybdenum Addition Rather than Prolonged Aging Heat Treatment. Metals 14, 828. https://doi.org/10.3390/met14070828
• Mujahid, S., Krivanec, C., Whittington, W., Agnew, S., Bhattacharyya, J., El Kadiri, H., Oppedal, A., Boostani, A., 2018. Effect of Rapid Heat Treatment on the Microstructure of Alpha + Beta Titanium Alloys, in: Contributed Papers from MS&T17. Presented at the MS&T18, MS&T18, pp. 659–663. https://doi.org/10.7449/2018/MST_2018_659_663
• Van Iderstine, D., Mujahid, S., Paudel, Y., Rhee, H., 2023. Effect of Electrical Resistance Heating on Recrystallization of Cold-Rolled Low-Carbon Steel. Crystals 13, 1650. https://doi.org/10.3390/cryst13121650
• Boostani, A.F., Mujahid, S., Oppedal, A.L., Krivanec, C., Whittington, W.R., Allison, P.G., Bhattacharyya, J.J., Agnew, S., El Kadiri, H., 2019. Heat Treatment Strategies to Improve the Quasi-Static and Dynamic Performance of Alpha + Beta Titanium Alloys, in: The Minerals, Metals & Materials Series (Ed.), TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, The Minerals, Metals & Materials Series. Springer International Publishing, Cham, pp. 1383–1387. https://doi.org/10.1007/978-3-030-05861-6_131
• Kaur, I., Mujahid, S., Paudel, Y., Rhee, H., Singh, P., 2022. Numerical Analysis of Flow and Heat Transfer Characteristics of Lattice-Based Compact Heat Sinks. J. Electron. Packag. 145. https://doi.org/10.1115/1.4056305
• Williams, A., Paudel, Y., Mujahid, S., Pepi, M., Czech, P., El Kadiri, H., & Rhee, H., 2024. Crystal Plasticity Modeling to Capture Microstructural Variations in Cold-Sprayed Materials. Crystals, 14(4), 329. https://doi.org/10.3390/cryst14040329
• Paudel, Y., Williams, A., Mujahid, S., Pepi, M., Czech, P., Rhee, H., & El Kadiri, H., 2024. A Residual Stress-Based Model for Viscoplastic Self-Consistent Simulation of Cold-Sprayed Al6061. Journal of Materials Engineering and Performance, 1-11. https://doi.org/10.1007/s11665-024-09572-7
• Xiao, Y., Cagle, M., Mujahid, S., Liu, P., Wang, Z., Yang, W., Chen, L., 2021. A gleeble-assisted study of phase evolution of Ti-6Al-4V induced by thermal cycles during additive manufacturing. J. Alloys Compd. 860, 158409. https://doi.org/10.1016/j.jallcom.2020.158409
• Van Iderstine, D., Cagle, M.S., Mujahid, S., Paudel, Y., Vogel, S.C., McClelland, Z.B., Moser, R.D., El Kadiri, H., Rhee, H., 2022. Cyclic intercritical annealing to improve strength-ductility combinations in medium manganese steels. Materialia 26, 101604. https://doi.org/10.1016/j.mtla.2022.101604
• Stewart, B.C., Doude, H.R., Mujahid, S., Fox, E.T., Edmunson, J.E., Abney, M.B., Rhee, H., 2022. Novel Selective Laser Printing Via Powder Bed Fusion of Ionic Liquid Harvested Iron for Martian Additive Manufacturing. J. Mater. Eng. Perform. 31, 6060–6068. https://doi.org/10.1007/s11665-022-06730-7
• Patel, M., Paudel, Y., Mujahid, S., Rhee, H., El Kadiri, H., 2023. Self-Consistent Crystal Plasticity Modeling of Slip-Twin Interactions in Mg Alloys. Crystals 13, 653. https://doi.org/10.3390/cryst13040653
• Rustom, S., Paudel, Y., Mujahid, S., Cagle, M., Anantwar, P., Hazeli, K., Moser, R., Paliwal, B., Rhee, H., El Kadiri, H., Barrett, C.D., 2023. Manufacturing Strategies to Mitigate Deformation Twinning in Magnesium. ASME Open J. Eng. 2. https://doi.org/10.1115/1.4056553
• Boostani, A., Whittington, W., Mujahid, S., Agnew, S., Allison, P., Bhattacharyya, J., El Kadiri, H., Krivanec, C., Oppedal, A., 2018. Heat Treatment of Alpha+Beta Titanium Alloys, in: Contributed Papers from MS&T17. Presented at the MS&T18, MS&T18, pp. 656–658. https://doi.org/10.7449/2018/MST_2018_656_658
• Stewart, B.C., Doude, H.R., Mujahid, S., Abney, M.B., Edmunson, J.E., Fox, E.T., Jones, J.M., Hill, C.W., Mehan, J.J., El Kadiri, H., Rhee, H., 2023a. Effects of nickel and manganese on ductile iron utilizing ionic liquid harvested iron and Bosch byproduct carbon. Acta Astronaut. 204, 175–185. https://doi.org/10.1016/j.actaastro.2022.12.047
• Stewart, B.C., Doude, H.R., Mujahid, S., Abney, M.B., Fox, E.T., Edmunson, J.E., Mehan, J.J., Henry, C.R., Hall, P.B., El Kadiri, H., 2023b. Comparison study of ductile iron produced with Martian regolith harvested iron from ionic liquids and Bosch byproduct carbon for in-situ resource utilization versus commercially available 65-45-12 ductile iron. Adv. Space Res. 71, 2175–2185
• Paudel, Y., Barrett, C., Mujahid, S., Rhee, H., El Kadiri, H., 2023. Micromechanics-based strain energy study of twin-band pattern in a three-point bend Mg alloy. J. Mater. Res. 38, 461–472. https://doi.org/10.1557/s43578-022-00831-8
  Stubblefield, G.G., Fraser, K.A., Van Iderstine, D., Mujahid, S., Rhee, H., Jordon, J.B., Allison, P.G., 2022. Elucidating the influence of temperature and strain rate on the mechanics of AFS-D through a combined experimental and computational approach. J. Mater. Process. Technol. 305, 117593.
• Paliwal, B., Moser, R.D., Barrett, C.D., Whittington, W.R., Rhee, H., Paudel, Y., Mujahid, S., El Kadiri, H., 2021. Martensitic microstructure evolution in austenitic steel: A thermomechanical polycrystalline phase field study. J. Mater. Res. 36, 1376–1399. https://doi.org/10.1557/s43578-021-00209-2
• Paramore, J.D., Butler, B.G., Dunstan, M.K., Rhee, H., El Kadiri, H., Whittington, W.R., Mujahid, S., 2020. The role of microstructure and strain rate on the mechanical behavior of Ti-6Al-4V produced by powder metallurgy. Int. J. Refract. Met. Hard Mater. 92, 105268. https://doi.org/10.1016/j.ijrmhm.2020.105268
• Russell, W.D., Bratton, N.R., Paudel, Y., Moser, R.D., McClelland, Z.B., Barrett, C.D., Oppedal, A.L., Whittington, W.R., Rhee, H., Mujahid, S., Paliwal, B., Vogel, S.C., El Kadiri, H., 2020. In Situ Characterization of the Effect of Twin-Microstructure Interactions on Tension and  Contraction Twin Nucleation, Growth and Damage in Magnesium. Metals 10, 1403. https://doi.org/10.3390/met10111403

Selected Professional Presentations

• Mujahid, S., Van Iderstine, Tsvetkov, D., El Kadiri, H., Rhee, H. “Examination of Discrepant Charpy Toughness in Hot-Rolled HSLA Steel”. DoD Steels Summit 2023, (Co-presenter)
• Van Iderstine, D., Mujahid, S., Paudel, Y., Vogel, S., McClelland, Z., El Kadiri, H., Rhee, H. “Effective Austenite Stabilization in Medium Manganese Steels Through Cyclic Intercritical Annealing”. DoD Steels Summit 2023, (Co-presenter)
• Van Iderstine, D., Mujahid, S., Paudel, Y., Rhee, H “Continued Examination of Direct Resistance Heating Effects on Recrystallization in Cold-Worked Steels”. DoD Steels Summit 2023, (Co-presenter)
• Salley, D., Mujahid, S., Williams, W., Brauer, S., Doude, H., Whittington, W, Field, D., Limmer, K., Doherty, K., Rhee, H. “​Characterization of Hydrogen Embrittlement in High Hardness Steels”, TMS 2021 (Presenter)
• Paudel, Y., Mujahid, S., Rhee, H., El Kadiri, “On the study of environment assisted hydrogen embrittlement in ultra-high hardness steel”. DoD Steels Summit 2020, (Presenter)
• Mujahid, S., Krivanek, C., Oppedal, A., Whittington, W., Allison, P., Boostani, A., Bhattacharya, J., Agnew, S., El Kadiri, H. “Effect of Heat Treatment Processing on Alpha+Beta and Metastable-Beta Titanium Alloys”. SEM Annual Conference 2018 (Presenter)